Revolt Bass

Price :

- PRE-ORDER NOW -

Buy from two notes

Buy from A two notes Dealer

SEARCH ONLINE

ReVolt Bass

Overview

Specs

Downloads & Manual

PRE-ORDER NOW
Revolt Bass
PRE-ORDER

WALL OF SOUND INCLUDED

This product comes with a lifetime licence for the Torpedo Wall of Sound plug-in.
Load DynIR cabinets directly in your DAW and mix with complete control over your tone.

READ ABOUT WALL OF SOUND
Expand your cabinet collection

This product allows access to over 500 DynIR cabinets from official brands and studios.
Explore the collection now and find the perfect DynIR cabinets for your tone and style.

GET MORE CABS
INCLUDED DYNIR CABINETS & EFFECTS
Revolt Bass

Revolt Bass comes with a lifetime licence of Torpedo Wall of Sound, complete with an incredible selection of 10 DynIR cabinets. With a wide range of included effects, you can mix your tracks recorded with Revolt to studio standards.

  • WGrandBlvd: Inspired by an Ampeg® 1×15
  • Fridge 9: Inspired by an Ampeg® 9×10
  • Heaven Top: Inspired by a David Eden® 4×10
  • AZBen: Inspired by an SWR® 1×18
  • AluXL: Inspired by an Hartke® 4×10
  • Marco: Inspired by a Markbass® 2×10
  • CalifLow: Inspired by a MESA/Boogie® 2×10
  • Dual BW15: Inspired by a Peavey® 2×15
  • 2NotesCSB: Inspired by a Custom 1×15
  • Voice V125: Inspired by a Vox® 1×12

DYNAMIC IR SPECIFICATIONS :

  • Virtual Cabinets come with captures from 8 studio and live microphones (Dynamic, Condenser, Ribbon)
  • Dynamic IRs are phase-corrected, preventing any phase issue
  • Blend two microphones together
  • Have direct access to 400+ Virtual Cabinets via the DynIR Cabinet Collection

MICROPHONE POSITIONING :

  • Distance : from close miking to room tone, seemless
  • Axis : from cone center to speaker shell, seemless
  • Front and back of the cabinet

POWER AMP EMULATOR :

  • Four classic tube types : EL84, EL34, 6L6, KT88
  • Two circuit types : Class A (Single Ended) and Class A/B (Push-Pull)
  • Two tube modes : Pentode and Triode
  • Volume, Contour and Depth knobs

5-BAND EQUALISER

  • Sculpts the tone coming out of the Virtual Cabinet
  • Five customisable semi-parametric bands going from -20dB to +20dB (and a low-cut filter)

EXCITER :

  • Dynamics and frequency shaping tool to beef up your tone
  • Low and High knobs for low-end and high-end emphasis

REVERB :

  • 8 legacy Room Ambience algorithms (Studio A & B, Loft, Cathedral, Basement, Hall A & B, Crypt)

COMPRESSOR :

  • Based on high-end studio rack compressors
Specifications
Revolt BASS

Input / Output

Input:
Jack 6.35 mm (1/4”) unbalanced (TS, Tip/Sleeve)
Impedance : 1 MOhms

Send:
Jack 6.35mm(1/4“) unbalanced (TS)
Max output level : +11dBu
Impedance : 300 Ohms

Return:
Jack 6.35mm(1/4“) unbalanced (TS)
Max input level : +11dBu
Impedance : 1 MOhms
Unbuffered, directly connected to Output when active

Output: 
Jack 6.35 mm (1/4”) unbalanced (TS)
Max output level : +11 dBu
Impedance : 300 Ohms

DI Output:
XLR, balanced
Impedance : 600 Ohms balanced, 300 Ohms unbalanced
Max output level : +11dBu
Protected against +48V phantom power

MIDI:
MIDI In & Out / Thru
TRS Jack Type-A
Din-5 Pin converter cables included

Phones:
Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve)
Impedance : 39 Ohms

Aux In:
Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve)
Impedance : 10 kOhms

Preamp

Tube:
PSVANE ECC83

Power

Mains power adaptor:
DC Jack 2.1mm, negative center

Input voltage:
12V DC

Power consumption:
Approx. 6W

Current draw:
600mA

Dimensions & weight

Width x Depth x Height*:
19.2cm x 11.7cm x 7cm – 7.6″ x 4.6″ x 2.8″
*Including connectors and knobs

Weight:
845 g / 1.86 lbs

Downloads & Manual
Revolt BASS