• BDeLuxe: Inspired by Fender® Blues Deluxe 1×12
  • BigBeast: Inspired by 4×12 Zilla cabinet with Celestion® Vintage 30 speakers
  • BoGreen: Inspired by Bogner® 4×12 Greenbacks G12M25 Reissue in 16ohms
  • Brit 65C: Inspired by Marshall® 1965A 4×10 Closed Back with Celestion® G10L-35
  • Brit Std: Inspired by Marshall® 1936 2×12 Celestion® G12T
  • Brit VintC: Inspired by Marshall® 1960A 4×12 closed back Celestion® Vintage 30 speakers
  • Celestion Ruby Open 1×12: Celestion® 1×12 cabinet with Celestion Ruby speaker
  • Copperback Closed 4×12 Celestion: Celestion® 4×12 cabinet with Celestion Neo 250 Copperback speakers
  • DarkPrinz: Inspired by Fender® Princeton 1×10 with Oxford 10J4-3 speaker
  • Eddie: Inspired by Peavey® 5150 2×12 Sheffield 1200
  • ENGL E112VB: Engl® E112VB with Celestion® Vintage 30 speaker
  • G12M Greenback Closed 4×12 Celestion: Celestion® 4×12 cabinet with Celestion G12M Greenback speakers
  • Greatsh: Inspired by Gretsch® 6159 amp cabinet with two Jensen® C12-PS
  • Rand RD112: Inspired by Randall® RD112 1×12 angled with Celestion® Vintage 30
  • Revv 2×12 Open Back V1: Revv® 2×12 open back with Warehouse Guitar Speakers Vet 30 and ET 90 drivers
  • Revv 4×12 Closed Back V1: Revv® 4×12 closed back with Warehouse Guitar Speakers Vet 30 and ET 90 drivers
  • Sig H75 LD: Inspired by Two-Rock® 2×12 cabinet with Celestion® G12-H75 speaker
  • Silver77: Inspired by Fender® Twin Reverb® 2×12 with orange JBL® speakers
  • Superblue: Inspired by Fender® 4×10 Super Reverb
  • Tanger Fat: Inspired by PPC412HP© 4×12 Orange® with Celestion® Heritage G12H & G12M Heritage Greenback
  • The One: Inspired by Brunetti® Neo1512 with 1×12 and 1×15 speakers
  • Vibro V30: Inspired by Fender® Vibrolux® 1×12 Celestion® V30 speaker
  • Victory Kraken 212V Classic: Victory® Kraken® 2×12 cabinet with Celestion® V30 speakers
  • Victory Sheriff 412C Classic: Victory® Sheriff® 4×12 cabinet with Celestion® G12H speakers
  • Voice 30: Inspired by Vox® AC30 JMI 2×12 Celestion® “Silver Bell”
  • Watt FanC: Inspired by Hiwatt® 2×12 Fane closed back

 

These DynIR Cabinets are not included in C.A.B. M+ Firmware upgrade for existing Torpedo C.A.B. M devices.

You can purchase them separately on the Two notes Store.

 

  • BassFlex: Inspired by Ampeg© Portaflex© B15N with original 15“ CTS speaker
  • Fridge: Inspired by Ampeg© 8×10
  • MetalBigBass: Inspired by Hartke® 410TP
  • OCBass410: Inspired by Form Factor Audio® 4×10
  • SilverRumble: Inspired by Fender© Rumble 500 2×10 with Eminence© speakers
  • Tio: Inspired by EBS® 611 with 1×15 and 1×10 Eminence© speakers

 

These DynIR Cabinets are not included in C.A.B. M+ Firmware upgrade for existing Torpedo C.A.B. M devices.

You can purchase them separately on the Two notes Store.

 

CLEAN PREAMP :

  • Carefully replicated from an all original ’74 SilverFace B’man
  • Unparalleled dynamics and musicality for a warm and lively pedalboard tone
  • Goes from a transparent clean tone to a delightful crunch complimenting your dirt pedals
  • Virtually noiseless, even at +12dB input gain
  • Guitar and bass modes for adjusted frequency responses
  • Gain, Volume, Bass, Medium and Treble knobs

POWER AMP :

  • Four classic tube types : EL84, EL34, 6L6, KT88
  • Two circuit types : Class A (Single Ended) and Class A/B (Push-Pull)
  • Two tube modes : Pentode and Triode
  • Volume, Contour and Depth knobs
DYNAMIC IR SPECIFICATIONS :

  • Virtual Cabinets come with captures from 8 studio and live microphones (Dynamic, Condenser, Ribbon)
  • Dynamic IRs are phase-corrected, preventing any phase issue
  • Blend two microphones together
  • Have direct access to 300+ Virtual Cabinets via the Two notes Store

MICROPHONE POSITIONING :

  • Distance : from close miking to room tone, stepless
  • Axis : from cone center to speaker shell, stepless
  • Front and back of the cabinet
NOISE GATE :

  • Eliminates unwanted noises from your guitar and pedals
  • Soft/hard gate settings
  • Noise level learn function

5-BAND EQUALISER

  • Sculpts the tone coming out of the Virtual Cabinet
  • Five customisable semi-parametric bands going from -20dB to +20dB (and a low-cut filter)

ENHANCER :

  • Dynamics and frequency shaping tool to beef up your tone
  • Guitar and bass modes for adjusted frequency responses
  • Thickness and Brilliance knobs for low-end and high-end emphasis
  • Body knob to make your tone cut through

REVERB :

  • 8 legacy Room Ambience algorithms (Studio A & B, Loft, Cathedral, Basement, Hall A & B, Crypt)
  • 4 new Reverb algorithms (Spring, Plate, Tile, Chamber)

IR LOADER :

  • Replaces Virtual Cabinet miking with up to two standard wave file IRs
  • IR lengths supported up to 200ms
  • Adjustable performance mode for ultra-low latencies down to 2.2ms

TUNER :

  • Works with guitars and basses
  • Customisable A frequency from 410Hz to 490Hz
  • Easy to reach with the press of a finger
Note: All product names mentioned on this website are trademarks of their respective owners, which are in no way associated or affiliated with Two notes Audio Engineering.

Input / Output

Amp/Inst/Line Input:
1/4″ Jack balanced (TRS)

In Level Switch*:
+12dB: Max level: 4 dBu, Impedance: 1 MOhms
0dB: Max level: 16 dBu, Impedance: 57 kOhms
-24dB: Max level: 40 dBu, Impedance: 47 kOhms
*Affects input sensitivity and impedance

Aux In:
1/8″ (3.5mm) TRS Jack

Speaker output*:
1/4″ Jack balanced (TS)
*Unprocessed, unbuffered, directly connected to Amp In

DI output:
XLR balanced
Max level: 10 dBu
Impedance: 300 Ohms

Line output:
1/4″ Jack balanced (TRS)
Max level: 10 dBu
Impedance: 300 Ohms

Headphones output:
1/8″ Mini-Jack (TRS)

USB connector:
USB 2.0 Micro-B

Memory card:
256Mb Micro-SD included
Up to 32Gb cards supported

Digital Audio

AD/DA Converters:
Studio-grade 24 bits / 96 kHz

Bandwidth (-1dB):
30 Hz – 19 kHz

Signal-to-noise ratio:
91 dB

Internal Processing:
32 bits floating-point

Latency:
2.2 ms (Line Input to Line Output)

Power

Power adapter:
DC Jack 2.1mm, negative center

Input voltage:
12V DC

Power consumption:
Approximately 2W

Current consumption:
200mA

Dimensions & weight

Width x Depth x Height*:
12.1cm x 10cm x 6cm – 4.8″ x 4″ x 2.4″
*Including connectors and knobs

Weight:
450 g / 0.99 lbs

Upgrading your Torpedo C.A.B. M with the C.A.B. M+ Firmware

What comes with the C.A.B. M+ Firmware

The C.A.B. M+ Firmware update for existing Torpedo C.A.B. M adds a Clean Preamp, updated Power Amps and new Reverbs and Rooms to your Torpedo C.A.B. M.

It doesn’t include the 32 new DynIR Virtual Cabinets shipped with Torpedo C.A.B. M+ units – you can purchase them separately on the Two notes Store.

How to upgrade existing Torpedo C.A.B. M devices

  1. Install the latest version of Torpedo Remote for Windows or macOS (links in Downloads section below).
  2. Connect your Torpedo C.A.B. M to your computer and start Torpedo Remote.
  3. Create a Two notes account and register your device on it if you didn’t already.
  4. Follow the firmware update prompt displayed on screen.